Triton TPL180 Manuel d'utilisation et d'entretien télécharger pdf (Page 6)

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

Power Tool Use & Care

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

WARNING: When used in Australia or New Zealand, it is

recommended that this tool is ALWAYS supplied via Residual

Current Device (RCD) with a rated residual current of 30mA

or less.

Service

a) Have your power tool serviced by a qualiﬁed repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

Additional safety for electric planers

WARNING: ALWAYS switch off and allow the blades to

come to a complete standstill before attempting any

adjustments, cleaning or carrying out maintenance.

WARNING: A dust mask and dust extraction system are

strongly recommended during usage to protect the opera-

tor against dust. Electric planers generate a large quantity

of dust and some materials will produce toxic dust.

WARNING: Wait for the cutter to stop before setting the

Safety Instructions

tool down. An exposed rotating cutter may engage the sur-

face leading to possible loss of control and serious injury.

WARNING: Hold the power tool by insulated handles or

gripping surfaces only, because the cutter may contact its

own cord. Cutting a “live” wire may make exposed metal

parts of the power tool ‘live’ and could give the operator an

electric shock.

WARNING: Use clamps or another practical way to secure

the workpiece to a stable platform. Holding the work by

your hand or against the body leaves it unstable and may

lead to loss of control.

a) Ensure all nails, screws etc are removed from the

workpiece before commencing the task. Otherwise,

damage to the blade or planer could occur, causing a

safety hazard

b) Ensure all cloth, cord, rags, string and similar items are

removed from the work area to prevent entanglement in

the planer mechanism

c) Handle blades with caution

WARNING: ALWAYS disconnect the tool from the power

supply before accessing blades or guards.

d) Ensure that the blade installation bolts are securely

tightened before operation

e) Before using the planer on a workpiece, switch on and

allow it to run for a while. Check for vibration or wob-

bling that could indicate a badly installed, or a poorly

balanced blade

f) Allow the machine to reach full speed before making

contact with the workpiece and starting cutting

g) Operate the planer only when controlled by both hands

h) Ensure the planer is at least 200mm away from your

face and body

i) Shavings may jam in the chute when cutting damp

wood. Switch off, disconnect from the power supply

and clean out the chips with a stick

WARNING: Never put your ﬁnger into the chip chute.

j) ALWAYS switch off and allow the blades to come to a

complete standstill before attempting any adjustments,

cleaning or carrying out maintenance

k) ALWAYS disconnect from the power supply when leav-

ing the machine unattended

l) When not in use, disconnect from the power source

and place the front base on a wooden block so that the

blades are not in contact with anything

m) Replace all blades at the same time, otherwise the

resulting imbalance will cause vibration and shorten the

service life of planer and blades

366649_Z1MANPRO2.indd 5 07/07/2014 10:24

1 2 3 4 5 6 7 8 9 10 11 ... 61 62

Commentaires sur ces manuels

Pas de commentaire

Triton TPL180 Manuel d'utilisation et d'entretien Page 6

Commentaires sur ces manuels