Triton Isis Manuel d'utilisateur télécharger pdf (Page 233)

June 2004 Isis® Sonar User's Manual, Volume1 219

2. You can now begin picking another layer to track by CTRL left-clicking in

the subbottom window.

3. Repeat this procedure for as many layers as you wish to track.

9.14.2 Tracking One or More Subbottom Layers

To track a picked layer or layers means:

• to have Isis trace the layer(s) while the imagery in your subbottom data

window is scrolling, and

• to have Isis save that data in an ASCII file that you specify.

Before you can track a subbottom layer, you must pick it. Refer to

‘To pick

a first subbottom layer for tracking’

if you have not yet picked your

layer(s).

To track a picked set of subbottom layers

1. In the Subbottom Picking and Tracking dialog box dialog box, choose

Automatic or Manual.

In Automatic mode, Isis attempts to follow the reflectors automatically.

In Manual mode, you point and click on the reflector you want Isis to

follow. At any time during the tracking, you can select any reflector and

edit its position on the screen.

2. Press SPACEBAR to resume playback.

3. The subbottom layer information will be written to the output file after it

has scrolled off the left side of the screen. If you have not specified a file

name, you will be prompted to do so at that time. Figure 9-27 shows

some data imagery, scrolled horizontally, with selective subbottom layers

identified in the lower window. Two layers have been picked.

Chapter 9: Using the Tools Menu

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 309 310

Pas de commentaire

Triton Isis Manuel d'utilisateur Page 233